Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 15.5CM/6.1INCH and DAYTIME RUNNING LIGHTS.
Two elongated LED lights with black housings and clear lenses, with inset white and amber illumination and pictured 48, 60, 72 and 84 LED labels.
Two elongated LED lights with black housings, clear lenses and visible yellow LED faces against a black background.
Pair of black-housed lights with clear lenses on black and a yellow banner labelled 23.5CM/9.3INCH and DAYTIME RUNNING LIGHTS.
Pair of black-housed lights with clear lenses on black and a yellow banner labelled 27.5CM/10.8INCH and DAYTIME RUNNING LIGHTS.
Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 34.5CM/13.6INCH and DAYTIME RUNNING LIGHTS.
Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-7
Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-8
    Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 15.5CM/6.1INCH and DAYTIME RUNNING LIGHTS.
    Two elongated LED lights with black housings and clear lenses, with inset white and amber illumination and pictured 48, 60, 72 and 84 LED labels.
    Two elongated LED lights with black housings, clear lenses and visible yellow LED faces against a black background.
    Pair of black-housed lights with clear lenses on black and a yellow banner labelled 23.5CM/9.3INCH and DAYTIME RUNNING LIGHTS.
    Pair of black-housed lights with clear lenses on black and a yellow banner labelled 27.5CM/10.8INCH and DAYTIME RUNNING LIGHTS.
    Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 34.5CM/13.6INCH and DAYTIME RUNNING LIGHTS.
    Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-7
    Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-8
Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 15.5CM/6.1INCH and DAYTIME RUNNING LIGHTS.
Two elongated LED lights with black housings and clear lenses, with inset white and amber illumination and pictured 48, 60, 72 and 84 LED labels.
Two elongated LED lights with black housings, clear lenses and visible yellow LED faces against a black background.
Pair of black-housed lights with clear lenses on black and a yellow banner labelled 23.5CM/9.3INCH and DAYTIME RUNNING LIGHTS.
Pair of black-housed lights with clear lenses on black and a yellow banner labelled 27.5CM/10.8INCH and DAYTIME RUNNING LIGHTS.
Pair of black-housed lights with clear lenses on black, pictured screws and a yellow banner labelled 34.5CM/13.6INCH and DAYTIME RUNNING LIGHTS.
Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-7
Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber-8

DRL Strip

Riglow™ Sequential LED DRL Strip Pair – White/Amber & Red/Amber

$40.00 BBD
$40.00 BBD
12V DCListed operating range
LED Strip (SMD)Listed bulb type

Check the selected option and compatibility before ordering. Open bulb guides ↗

Length
Color White/Amber

RIG-DRL-155-WA

Availability applies to the selected option.

Delivery — BarbadosPay in full via 1stPay, BIMPay or bank transfer and send payment confirmation before courier release. Choose delivery at checkout.

Store pickupPickup orders may be paid when collected. Wait for confirmation that your order is ready.

Need help choosing? Contact Riglow ↗

BEFORE YOU ORDER

The right upgrade starts with the right fit.

Confirm the bulb socket, dimensions, connections and application relevant to this product. If unsure, send us a photo before ordering.

Listed specifications

Bulb Type
LED Strip (SMD)
Voltage
12V DC
Package Contents
2 × Sequential LED DRL lights (1 pair)
Notes
Listed package: two lights (one pair); prices are per pair. White/Amber lengths: 15.5cm, 23.5cm, 27.5cm and 34.5cm. Red/Amber lengths: 15.5cm and 23.5cm only. These colour options are not Kelvin ratings; temperature field is blank. White or red illumination switching to sequential amber requires selected-product and vehicle-circuit confirmation. 'DRL' is a listing label, not certification or suitability for every colour/position. Saved 12V DC is an unverified listing value, not a confirmed electrical limit or power/test instruction. LED/SMD identity requires supplier evidence; no chip model is established. Black housings, clear lenses, surface mounting and integrated screw holes are unverified listing details. Earlier flexible silicone, adhesive backing and IP67 claims in guidance lack supporting evidence; waterproofing, material, flexibility and mounting/modification methods require confirmation. Earlier red-to-ACC positive, black-to-ground and yellow-to-turn-positive directions are unverified. Obtain exact supplier/vehicle pinout, polarity, circuit protection and test procedures rather than inferring functions by wire colour. Universal fit, headlight/fog-area suitability and plug-and-play compatibility are not established. CANBUS and fan fields are blank, not confirmed false. The LED warranty field currently reads blank; an earlier saved 1 Year claim is retained here pending confirmation of coverage and exclusions. No warranty coverage is inferred from the blank field. No complete vehicle-specific installation solution is assumed.
Will it fit my vehicle?

Confirm the bulb socket, dimensions, connections and application relevant to this product. If unsure, send us a photo before ordering.

Open bulb guides ↗
Installation & warranty guidance

We do not install on site. A referral to an external technician is available when needed.

View warranty terms ↗
Full product details & package contents

A paired lighting accent for your custom build

The Riglow™ LED DRL Strip Pair is listed with white or red illumination and sequential amber turn-signal switching. Confirm the selected lights' functions and vehicle-circuit compatibility before installation.

Colour and length options

  • White/Amber: 15.5cm, 23.5cm, 27.5cm or 34.5cm.
  • Red/Amber: 15.5cm or 23.5cm only.

Each purchase is listed as two lights, sold as one pair. Prices are per pair and include VAT.

Confirm mounting and electrical requirements

Black housings, clear lenses, surface mounting and integrated screw holes are listing details requiring confirmation. Flexible silicone, adhesive backing, IP67 and headlight/fog-area suitability are unverified. Do not assume a mounting method or waterproof installation.

The saved 12V DC value is an unverified listing claim, not a confirmed operating limit or power/test instruction. Earlier wire-colour directions are not a verified wiring specification. Obtain actual pinout, polarity, circuit protection and testing procedures from the selected-product supplier and vehicle instructions; do not infer wire functions from colour alone.

Universal fit and plug-and-play compatibility are not established. Check selected-length fit, cable reach, visibility and clearance from heat, sharp edges, moving components and safety systems. Use a qualified installer where requirements are unclear.

The DRL label does not establish suitability for every colour or mounting position. See the linked product specifications, LED notes, FAQ and installation planning for remaining verification requirements. Warranty coverage requires confirmation; the earlier one-year claim is retained in the linked notes.

Guides and FAQs

Riglow™ Sequential LED DRL Pair Installation Planning

Difficulty: Application-dependent; qualified installer recommended where requirements are unclear

Tools required

Obtain selected-product supplier instructions and vehicle service procedures. Use the specified tools, mounting materials, surface preparation, connections and protection for the exact application.

Step-by-step instructions

1. Identify the selected pair and confirm supplied contents. White/Amber lengths are 15.5cm (approximately 6.1 inches), 23.5cm (9.3 inches), 27.5cm (10.8 inches) and 34.5cm (13.6 inches); Red/Amber lengths are 15.5cm (6.1 inches) and 23.5cm (9.3 inches) only. All inch equivalents are approximate.
2. Obtain supplier and vehicle procedures before mounting or connections. Confirm actual operating limits, pinout, polarity, circuit protection and isolation/test procedures. The saved 12V DC claim is not a verified electrical limit.
3. Do not use the earlier red/black/yellow mapping as a wiring specification or infer functions from wire colour. Have a qualified installer establish compatibility with the exact vehicle circuits.
4. Check selected-length fit, cable reach, visibility and clearance from heat, sharp edges, moving components and safety systems. Headlight/fog-area suitability and universal fit are unverified.
5. Confirm supplier-approved mounting and environmental protection. Adhesive backing, flexibility, silicone composition, screw holes and IP67 are unverified; do not assume cleaning, adhesive, drilling or housing-opening procedures.
6. Confirm the intended white/red illumination and sequential amber switching for the selected pair and vehicle circuits. No lighting function or colour/position suitability is guaranteed by the DRL label.
7. Perform installation, testing and final securing only under supplier and vehicle procedures after compatibility is established. Do not cut or modify components without supplier permission; stop if requirements remain unclear.

Notes

Planning only, not a manufacturer-verified wiring, mounting or power/test guide. Earlier red-to-ACC positive, black-to-ground and yellow-to-turn-positive instructions lack selected-product evidence and must not be used as a wiring specification. Earlier flexible silicone, adhesive backing, IP67 and headlight/fog-area installation claims are unverified. Surface-mount housings, clear lenses and screw holes are listing details requiring confirmation. Waterproofing of lights and installation connections is not established. Universal fit and plug-and-play compatibility are unverified. Sold as one pair of two lights; verify actual contents. Installation time is blank pending evidence; supplier PDF/video links remain blank. Use supplier and vehicle procedures rather than generic electrical, adhesive or headlight-opening instructions.
How do I mount and wire the Riglow™ Sequential LED DRL Strips?
Use the exact selected-product supplier instructions and vehicle procedures to confirm mounting and electrical compatibility before installation. Flexible construction, adhesive backing, screw holes and headlight/fog-area suitability are unverified listing claims, not confirmed installation methods.

The saved 12V DC value and earlier wire-colour directions are unverified. Obtain actual operating limits, pinout, polarity, circuit protection and test procedures; do not infer functions from wire colour or use the earlier red/black/yellow mapping as a wiring specification. Use a qualified installer where requirements are unclear.

White or red illumination switching to sequential amber requires confirmation for the selected lights and vehicle circuits. Universal fit and plug-and-play compatibility are not established.

Sold as one pair of two lights. White/Amber lengths are 15.5cm, 23.5cm, 27.5cm and 34.5cm; Red/Amber lengths are 15.5cm and 23.5cm only. Confirm mounting space, clearance, environmental protection and actual supplied contents.

You may also like